带凹性生产成本运输问题的新随机规划模型及其求解

提出了一种新的能反映决策者满意度的随机变量序关系,并据此研究了随机不等式的确定性等价类,方法被称为满意度方法.最后将其应用于带凹性生产成本运输问题的求解中,并将方法与常用的机会约束方法进行比较,说明满意度法不仅合理可行,而且当决策者对约束条件的要求越高时,它所得最优值越优于机会约束法所得最优值.     

Quantum topology phase diagrams for molecules,clusters, and solids

The need to make more quantitative use of the total electronic charge density distribution is demonstrated in this short perspective. This is framed in the perspective of the ground breaking early work of Bader and coworkers, along with mathematicians who captured the essential nature of a molecule in a suitably compact form in real space. We see that this simple form is the Poincaré–Hopf relation for molecules and clusters and the Euler–Hopf relation in solids. Thom's theory of elementary catastrophes combined with the Poincaré–Hopf relation provides the inspiration for the new quantum topology. An alternative use of the Poincaré–Hopf relation, molecular recognition, is discussed. Quantum topology is then used to create a topology phase diagram for both molecules and solids. The author adds their perspectives of the huge potential of the quantum topology approach by demonstrating the ease with which new theoretical ideas can be generated. © 2013 Wiley Periodicals, Inc.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.     

Gap formulas for closed linear relations

A classical formula for the gap between two densely defined closed operators in a Hilbert space is extended to the case of linear relations. Copyright © 2014 John Wiley & Sons, Ltd.     

4类图完美匹配数目的递推求法

本文研究了4类特殊图完美匹配数目的显式表达式.利用划分,求和,再递推的方法分别给出了图3-n Z4,2-n(2-C6),2-n(2-K4)和3-n(C4-C6)的完美匹配数目的计算公式.     

Circumventing the OCl versus OOH scaling relation in the chlorine evolution reaction: Beyond dimensionally stable anodes

The development of selective electrocatalysts for the chlorine evolution reaction (CER) is majorly restrained by a scaling relation between the OCl and OOH adsorbates, rendering that active CER catalysts are also reasonably active in the competing oxygen evolution reaction (OER). While theory predicts that the OCl versus OOH scaling relation can be circumvented as soon as the elementary reaction steps in the CER comprise the Cl rather than the OCl adsorbate, it was demonstrated recently that PtN₄ sites embedded in a carbon nanotube follow this theoretical prediction. Advanced experimental analyses illustrate that the PtN₄ sites also reveal a different reaction kinetics compared to the industrial benchmark of dimensionally stable anodes (DSA). A reverse Volmer–Heyrovsky mechanism was identified, in which the rate-determining Volmer step for small overpotentials is followed by the kinetically limiting Heyrovsky step for larger overpotentials. Since the PtN₄ sites excel DSA in terms of activity and chlorine selectivity, we suggest the Cl intermediate as well as the reverse Volmer–Heyrovsky mechanism as the design criteria for the development of next-generation electrode materials beyond DSA.     

Studies of Coumarin Derivatives for Constitutive Androstane Receptor (CAR) Activation

Constitutive androstane receptor (CAR) activation has found to ameliorate diabetes in animal models. However, no CAR agonists are available clinically. Therefore, a safe and effective CAR activator would be an alternative option. In this study, sixty courmarin derivatives either synthesized or purified from Artemisia capillaris were screened for CAR activation activity. Chemical modifications were on position 5,6,7,8 with mono-, di-, tri-, or tetra-substitutions. Among all the compounds subjected for in vitro CAR activation screening, 6,7-diprenoxycoumarin was the most effective and was selected for further preclinical studies. Chemical modification on the 6 position and unsaturated chains were generally beneficial. Electron-withdrawn groups as well as long unsaturated chains were hazardous to the activity. Mechanism of action studies showed that CAR activation of 6,7-diprenoxycoumarin might be through the inhibition of EGFR signaling and upregulating PP2Ac methylation. To sum up, modification mimicking natural occurring coumarins shed light on CAR studies and the established screening system provides a rapid method for the discovery and development of CAR activators. In addition, one CAR activator, scoparone, did showed anti-diabetes effect in db/db mice without elevation of insulin levels.     

Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating

The higher wear resistance of Ni based nano composite coatings makes them potential replacement in protecting the substrate materials. The role of surface roughness of the coating along with wear parameters on the specific wear rate, pin temperature, and COF are addressed in the present study. The use of hard nano Al₂O₃ particles found significant role in increasing the resistance to wear for Ni matrix coatings on Al6061 material. The resistance to dislocation offered by these nano Al₂O₃ particles and smear out of debris with plastic deformation indicated abrasive and adhesive nature of wear mechanism in combination. The optimization of wear parameters are carried out by surface response method based grey relation analysis. The normal load applied onto the pin has significant influence on the specific wear rate and temperature rise in the pin. The surface roughness of the coating has also found instrumental in the higher pin temperature and friction coefficient.     

A new high frequency dynamic mechanical analysis system: An approach to direct high frequency testing of tire tread rubber

Dynamic Mechanical Analysis (DMA) systems are measurement devices for obtaining master curves and complex modules of viscoelastic materials, such as rubbers. The conventional DMAs measurement systems in market have several limitations, which restrict their ability for operating at high frequencies. Thus, Williams, Landel and Ferry (WLF) relation is used to produce master curves and predict the material properties at high frequencies. In conventional DMAs, experiments are done in a range of temperatures, and then a master curve is made for a chosen reference temperature by shifting the measurements data to high frequencies. Therefore, the obtained results, which are not based on direct measurements, can be inaccurate. In order to overcome this problem a new simple shear high-frequency DMA (HFDMA) system is designed and built to directly measure the dynamic mechanical properties of viscoelastic material at high frequencies and the strain levels sufficient for tire manufacturers. The new HFDMA can be used to test any viscoelastic materials which have glass transmission temperature (Tg) lower than room temperature (about 23 °C) such as the Styrene-butadiene rubber (SBR). The SBR is the base material for tire tread. The designing process of this new HFDMA is presented in this paper. The rubber specimen shape is chosen by taking into account the shear elastic wave effect, bending, buckling effect and heat generation in the specimen. The repeatability test is accomplished to ensure that the results obtained from the new HFDMA are repeatable and the repeatability uncertainty is about 0.04%. The new HFDMA is validated by comparing to the direct test results of conventional DMA at 100 Hz. The direct high frequency (5 kHz) complex shear modulus and damping factor are compared with the master curve of the conventional DMA developed by the use of WLF relation for SBR. This comparison revealed that the complex shear modulus and damping factor of the SBR obtained from the HFDMA at 5 kHz and 0.05% strain amplitude are about 7% and 6.5% higher than those obtained from the conventional DMA, respectively.     

Effect of working temperature on the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites

In the present study, the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites (hybrid composites) in the working temperature range from 23 °C to 90 °C was studied by experimental and constitutive methods. Monotonic and cycle loading-unloading single-lap-shear tests were employed to determine the interfacial properties of hybrid composites. The experimental results show that both interfacial shear strength and shear stiffness decrease with increasing working temperature. A regression function was adopted to evaluate the decaying degree of interfacial properties with increasing working temperature. The shear stress-displacement relationship under monotonic loading exhibits nonlinear behavior after an initial elastic region. The envelope lines of shear stress-displacement of hybrid composites under cyclic loading indicate that the nonlinearity in the curve is caused by the plastic deformation of polypropylene in the interphase region. A constitutive model was built to describe the nonlinear shear stress-displacement relation of hybrid composites at different working temperatures. A full suite of temperature-dependent plastic parameters in the model was obtained from cyclic loading-unloading tensile tests. The predicted shear stress–displacement curves agreed well with experimental results from different working temperatures. In addition, the failure mode of hybrid composites varied with working temperature.